ROLL UP DOOR OPENER ET-30
The ET-30 one piece roller door opener was designed with ease of use and reliability in mind, starting with its engineering and safety features down to its sleek profiled design. Security is taken care of by a rolling code technology remote handset that changes with every press of the button. This makes the ET30 roller door opener the right choice when choosing your new roller door openers.
Technical details
| Input voltage | 200-240V AC 50Hz |
|---|---|
| Motor type | 24 V DC Permanent Magnet |
| Motor power | 100 Watts |
| Maximum door opening | 18 square meters |
| Reel diameter | 270 mm |
| Operating speed | 8m/min |
| Power for Fuse | 1 A 240 V |
| Courtesy Light | L.E.D |
| Receiver type | UHF 433.92 MHz AM Receiver |
| Transmitter frequency | 433.92 MHz |
| Coding type | Coding Hopping |
| No. of code combinations | Over 4.29 Billion Random Code |
Key features
- Powerful and quiet DC motor, quick installation
- Push button internal operation
- When closed the motor automatically locks
- Automatic reversing system
- Auto close option can be enabled
- Electronic limit switch
- Manual release in case of power failure
- Courtesy LED light automatically lights on
- Soft start, soft stop
- Photocell is available
- Accepts any stand alone receiver
- Metal structure, more stronger than plastic
Advanced Technology
Access for socket set to tighten “U” clamp Its not a worry to tighten the clamp nuts after the motor has been fixed. This smart bottom design is a better choice for any installer. Back cover design to fix battery backup. Put our battery back of the cover, make your motor to be a real one piece design
Minimum side room required: 40 mm An effective solution for any low side room, it only needs 40 mm from the edge of the curtain to the wall.
Practical
Standard Kit Including:
- Motor x 1 pc
- Transmitter x 2 pcs
- Remote bracket x 1 pc
- U-clamp and cast iron x 1 kit
- Extended fork x 2 pcs
- Extended release arm x 1 pc
- Certification card x 1 pc
- Manual x 1 pc
- Weight bars x 2 pcs (optional)